Safely charge your e-bike battery with the BatteryBox and limit damage in case of ignition!
Specially designed for the storage/charging of lithium-ion batteries
Patented, fully fireproof
Het gepatenteerde cilindrische ontwerp van de BatteryBox is geschikt voor het veilig opbergen en laden van lithium-ion batterijen. Door het unieke ontwerp is de BatteryBox is resistant to the explosive pressure generated during a battery fire and controls the fire and high temperatures, which can reach up to 1,200°C. The BatteryBox is fully fireproof for an unlimited number of minutes.
Storage capacity: up to 2,000Wh., separate storage for battery/charger
If multiple bike batteries are stored in a charging cabinet and one of these batteries catches fire, a chain reaction can occur, causing the other bike batteries to also ignite. The resulting immense explosive pressure and toxic gas formation are life-threatening.
De capaciteit van de BatteryBox is maximaal 2.000Wh. (bijvoorbeeld 2 accu’s van 1.000Wh. of 4 van 500Wh.), waarbij de lader en de batterij van elkaar worden gescheiden. Door deze gescheiden opslag wordt voorkomen dat de temperatuur onnodig oploopt, hetgeen een positief effect heeft op de levensduur van uw fietsaccu en het risico op ontbranding verlaagt.
Safe smoke exhaust
The advice is the BatteryBox to provide a safe smoke exhaust so that toxic smoke and flying cell particles are expelled to the outside air. If a safe exhaust to the outside air is not possible, we advise you on the best possible solution for your situation.
Modular
Thanks to the modular principle, the charging capacity can be easily expanded.
Considering operating height, we recommend stacking a maximum of 4 modules. For better accessibility to the lowest module, it is possible to place a configuration of 1, 2, 3, or 4 stacked modules on a base frame.
User-friendly
The BatteryBox is easy to use. If the door is not closed properly, this is communicated with both a light and sound signal.
Fire-resistant: Fully and unlimited number of minutes
Capacity: Maximum 2,000Wh.
Dimensions, external (LxWxH): 630x346x448mm
Dimensions, internal (LxWxH): 550x254x254mm
Weight: 22kg
Material: Steel 2mm, door: 3mm
Door: Steel, reinforced with double steel ring
Diameter of door: 25,4cm
Tube Rubber: Non-flammable, suitable for cable passage
Finish (exterior): Powder coating RAL7016
Alarm system: Audio and visual door detection/control system
Electricity: Wiring harness 100×2.5mm CT1012
Power outlets (2x): Grounded-Euro 50×50 Insert
Net entry: Euro Fast 6.3×0,8 6100-4230 Schurt
Power cord: 1×3 meter Black Euro RHT (C13) 10A 250V
The patented cylindrical design withstands explosive pressure and controls fire and high temperatures up to 1,200°C. This prevents dangerous chain reactions that can occur with battery fires
Maximum of 2,000Wh. per compartment, with separate storage for the battery and charger to prevent overheating and extend battery life
The BatteryBox is expandable by stacking multiple modules, making it easy to increase charging capacity.
Het product is getest door gerenommeerde instituten zoals KIWA en MPA Dresden en voldoet aan de eisen van verzekeraars voor 24/7 verzekerd laden. De BatteryBox voldoet aan de relevante VDMA-richtlijnen, maar beschikt momenteel niet over een officiële VDMA-certificering.
The BatteryBox is fully fire-resistant for an unlimited amount of time, providing additional safety in case of potential battery fires.
The system can be equipped with a safe smoke exhaust, which vents toxic smoke and cell particles outside, protecting indoor air quality.
The BatteryBox emits a light and sound signal if the door is not properly closed, enhancing user convenience and safety.
The BatteryBox should be placed on a stable and preferably level surface. Optionally, the BatteryBox can be placed on a base frame to improve accessibility to the lower charging compartments. The base frame has a height of 15 cm. It is recommended to stack a maximum of 4 modules.
According to VDMA guidelines, a battery charging cabinet must be equipped with a smoke exhaust that vents to the outside air. For safe smoke exhaust, using the correct materials and ensuring proper installation are essential.
If a smoke exhaust venting to the outside is not possible, the smoke exhaust can be equipped with a smoke detector, which can optionally be connected to an alarm system. Although this solution does not meet VDMA guidelines, the BatteryBox ensures that the consequences of a battery fire are limited to smoke damage.
The BatteryBox can be assembled in many configurations
Then feel free to contact us!
